Power & Electrical Studies
- Power flow study
- Short circuit study
- Arc flash study (IEEE 1584)
- Harmonic analysis
- Protection & grading study
We study, design, install, test and commission HV and LV networks for power plants, substations, waste-to-energy, oil & gas and process industries, from the first load-flow study to the day the system is energised.
A real project, from the first study to the day the plant goes live, filmed from our own sites and drawings. Tap a stage to jump to it, or turn on the narration.
The same project as a live 3D model: study, design, install, test and energise. Drag to look around, or tap a stage.
Take a single study or the whole package. The engineers who model your network specify the equipment, witness the factory tests and energise it on site.
Six questions, two minutes. You get an indicative risk rating and the studies most likely to matter for your site.
“We aim to give customers the highest quality system: a complete package from design, supply and commissioning.”
Biomass, waste-to-energy, industrial upgrades and international substations, delivered as complete packages since 2017.

Complete power system upgrade from design to commissioning: power studies, equipment supply and installation, DNO outage coordination and full energisation, including renewables integration.

Electrical network upgrade for the refuse-derived fuel (RDF) system: 11 kV switchgear, an 11 kV/433 V transformer, LV and DC battery panels, HV/LV cabling and a GRP enclosure, through FAT, SAT and operator training.

Power study for the RDF upgrade, then supply, installation and commissioning of 11 kV switchgear, an 11/0.433 kV transformer, LV and DC battery panels, cable tray and a GRP enclosure, with the DNO outage planned around the plant.

Network study in every scenario, CT saturation modelled to IEC 61869 with the generators' DC component, a reverse-blocking directional protection scheme over IEC 61850 GOOSE, a plant trip matrix and arc flash to IEEE 1584 / NFPA 70E.

GOOSE/MMS and Modbus signal lists, SAS architecture, CID files for every relay, and a multipoint synchronising panel running Howeizeh's own NG-100 power management system, plus UPS DC design with SAFT battery sizing.

As Siemens' UK representative: factory acceptance testing of 11 kV HV panels with 120 protection relays, relay configuration, secondary injection and signed test reports.

Protection and discrimination study, design validation from the DNO substation to every consumer, HV/LV commissioning before first energisation, more than 10 design changes during commissioning, loop diagrams for 1,200 loops and annual SIS proof testing.
Our engineers terminate the cables, run the injection tests and stand beside the switchgear when it closes for the first time.








Internationally qualified, with decades of hands-on delivery across power, oil & gas and process industries.
Electrical engineer across oil & gas, thermal power and renewables. Senior Authorised Person for HV switching, TÜV Rheinland Functional Safety Engineer (#17340/18) and CompEx Ex12 certified for hazardous-area design.
16+ years on waste-to-energy, oil & gas, petrochemical and non-ferrous metals projects, with Emerson, Honeywell, Siemens and ABB control systems.
From global OEMs to the operators who keep Britain's waste-to-energy and biomass plants running.




Initial consultation, site survey and gap analysis at no cost, before any contract is signed.
20–22 Wenlock Road, London N1 7GU, UK